June 19, 2020

Deep, deeper, deepest!

EMerald Geomodelling can «see» underground, but how far down can they actually see? Geologist Anne H. Rasmussen tells us that she can see a lot further than what is necessary for her to be able to ensure the safety of roads, railways and tunnels.

Construction pits can reach deep into the unknown. Sound knowledge of ground conditions prior piling and excavation is a necessity. Photo courtesy of NGI

Anyone who wants to build something – whether that be a road, a rail line or a tunnel – has to know what is concealed under the ground. Miscalculations relating to ground conditions can cost dearly in both time and money, and subsoil drilling is time-consuming and expensive and leaves behind scars in the landscape. In addition, drilling provides only small, extremely localised nuggets of information, and developers have to make deductions and guesses as to what is to be found in between the drill holes. With EMerald Geomodelling’s airborne, electromagnetic geoscanning the required information can be obtained quickly and simply, not to mention the fact that it can be presented in the form of an easily understandable and user-friendly 3D-model of the ground. 

3D map

Rasmussen has worked for 10 years as a geophysicist at SkyTEM Surveys, which is the company that does the flying for EMerald Geomodelling. Now she works for EMerald as a geologist and senior data scientist, and will be using her detailed knowledge of electromagnetic scanning to further develop what it is possible to draw out of the mass of data that is obtained.

«We generate a practical and easily accessible 3D map of where the bedrock lies and where there are challenges with, for example, quick clay,» she explains. The maps give the developers information that they can use when they are choosing between routes with, for example, more quick clay or a short way down to solid rock.

The question of how deep it is possible to measure is usually quick to arise. And the answer? «It depends entirely on where you are looking and what you are looking for.» 

Soil conducts electricity

EMerald Geomodellinguse electromagnetism to measure how well the various soil layers conduct electricity,and this knowledge of the conductive properties of the different soil types enables them to model good maps of what lies hidden beneath the ground. For example,gneiss or granite does not conduct electricity particularly well, whereas rocktypes that contain metals – such as iron, gold, silver or tin – are goodconductors.

«The response to the question of depth depends on what sort of soil you need to see through and whether there is salt water or fresh water in the ground,» says Rasmussen. SkyTEM Surveys’ equipment was originally developed to scan for groundwater storage in Denmark. It is therefore more sensitive than its competitors, which are generally used for mineral exploration within the mining industry. This Danish technology makes it possible for EMerald Geomodelling to find quick clay in the ground, which is one of the main challenges in large-scale infrastructure projects. 

Deeply and accurately

«Scanning takes place by means of sending rapid electrical pulses down into the ground and producing a magnetic field that we can measure. If we choose to emit a current that is strong enough to have a bit of a kick, we can get quite a long way down,» she adds. Sometimes 200 meters might be enough; at other times 600 meters is required. But she points out that deep surveys mean losing some of the resolutionin the uppermost soil layers, which are usually the areas that developers need information about.

Then there is this question about depth:

How far down can an electromagnetic measurement really provide useful information?

«It is almost impossible to say what the maximum depth of measurement might be. The equipment can get down to 800 meters when searching for diamonds and gold, for example, or we can confine ourselves to the uppermost 200–300 meters that are relevant for geotechnics. People building roads and railways need knowledge about quick clay and the distance down to bedrock and other stable layers, and we can supply that information from scanning with a high degree of accuracy,» she concludes.

Other news stories

All stories
1

Talk to us about your project

All we need to know is where your project is located, its size and particular geological unknowns. Based on that we can assess technological feasibility and economic benefit.

2

We scan the project area

Once we thoroughly assessed the added value of our method for your goals and received an order, you lean back and we care for data acquisitions, harvesting, integration and machine-learning based model building.

3

Work with an easy to understand 3D model

Working with EMerald you won’t need domain specialists to make sense of the sensed. We deliver and give easy access to integrated 3D models that provide the insights your project needs.

Let's talk about your project

Our team will get in touch with you shortly.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.